SHIELDS 1/2 Inch Door Window for John Deere G-Series Skid Steers

SHIELDS' 1/2 inch polycarbonate door window for John Deere G-Series skid steers replaces glass T344818 on the 320G, 324G, 325G, 330G, 331G, 332G and 333G, and SHIELDS has also seen it fit the 320P, 324P and 325P. You choose between two cuts: SHIELDS mills the 2019 and older window for the bolts only and the 2020 and newer window for the bracket. Each comes with the SHIELDS Seal gasket installed and SUPERCOAT on both sides, in clear or tint. E series machines with serial numbers 269402 and above take this window too.

The SHIELDS 1/2 inch front windshield door replaces the glass door on John Deere G-Series skid steers. It is curved like the original glass, coated on both sides with SHIELDS' SUPERCOAT hard coat, and comes with SHIELDS' own 1/2 inch gasket already installed. SHIELDS makes a 2019 and older cut and a 2020 and newer cut, each in clear or tint.

SHIELDS John Deere G-Series Front Door Window Features: a John Deere Skid Steer Door for 2019 and 2020 Machines

• 1/2 inch formed polycarbonate, which SHIELDS rates at more than 260 times the strength of glass at half the weight
• SUPERCOAT hard coat on both sides resists abrasion, so you can keep using your wiper
• The 1/2 inch window comes with SHIELDS' own 1/2 inch gasket, the SHIELDS Seal, already installed, and still drops in like the original
• Two cuts: the 2019 and older window is milled for the bolts only, and the 2020 and newer window is milled for the bracket
• Tint is built into the material, not a film; SHIELDS advises against adding aftermarket tint film because the coating will not hold adhesives
• Made by SHIELDS, which has made windshields since 1975

John Deere G-Series Door Window Part and Glass Numbers

SHIELDS publishes the material data that applies to this John Deere G-Series door window: the SHIELDS polycarbonate windshield technical data sheet (PDF) covers impact strength, light transmission and UV resistance, the SHIELDS SUPERCOAT hard coat data sheet (PDF) covers abrasion and chemical resistance, and the SHIELDS polycarbonate vs glass comparison sheet (PDF) compares weight, sound, heat and light by thickness.

Which John Deere G-Series Skid Steers Does This Door Window Fit?

Fits these John Deere models: 320G, 324G, 325G, 330G, 331G, 332G and 333G, plus the 320P, 324P and 325P.

SHIELDS finds this window has fit the 320P, 324P and 325P; check the glass number, T344818, on your current door.

Machines made in 2020 or newer take the 2020 and newer cut.

SHIELDS notes a serial break in the E series: serial numbers 269402 and above take this G window.

Send us your machine make, model and serial number, plus the glass number from your current window if you have it, and we will confirm the fit before you order.