SHIELDS 1/2 Inch Front Windshield for JCB 3TS-8T and Teleskid Loaders

JCB's teleskid track loaders, the 3TS-8T, 2TS-7T, 250T, 290T, 4TS-8T and 400T, use front windshield glass 402/P5831. SHIELDS replaces it with a flat 1/2 inch polycarbonate windshield with an etched edge, the finish it uses on glue-in windows, and SUPERCOAT on both faces. Choose clear or tint. This part replaces the glass version only. JCB also built a bolt-on OEM polycarbonate window for these machines, which takes a different SHIELDS part, so tell us which one your machine has before you order.

This SHIELDS 1/2 inch polycarbonate front windshield replaces the glass on JCB teleskid track loaders: the 3TS-8T, 2TS-7T, 250T, 290T, 4TS-8T and 400T. SHIELDS etches the edges of this glass replacement and coats both sides with its SUPERCOAT hard coat. Choose clear or tint.

SHIELDS JCB 3TS-8T Teleskid Front Windshield Features: a JCB Teleskid Windshield With Etched Edges

• 1/2 inch formed polycarbonate, which SHIELDS rates at more than 260 times the strength of glass at half the weight
• SUPERCOAT hard coat on both sides resists abrasion, so you can keep using your wiper
• Replaces glass 402/P5831
• SHIELDS lists this as its etched edge glass replacement, the edge finish it uses on glue-in windows
• Flat like the original glass
• Tint is built into the material, not a film; SHIELDS advises against adding aftermarket tint film because the coating will not hold adhesives

JCB 3TS-8T Teleskid Windshield Part and Glass Numbers

SHIELDS publishes the material data that applies to this JCB teleskid windshield: the SHIELDS polycarbonate windshield technical data sheet (PDF) covers impact strength, light transmission and UV resistance, the SHIELDS SUPERCOAT hard coat data sheet (PDF) covers abrasion and chemical resistance, and the SHIELDS polycarbonate vs glass comparison sheet (PDF) compares weight, sound, heat and light by thickness.

Which JCB Teleskid Machines Does This Windshield Fit?

Fits these JCB models: 3TS-8T, 2TS-7T, 250T, 290T, 4TS-8T and 400T.

This window replaces the glass version. JCB also built a bolt-on OEM polycarbonate window for these machines, which takes a different SHIELDS part, so tell us which your machine has.

Send us your machine make, model and serial number, plus the glass number from your current window if you have it, and we will confirm the fit before you order.