SHIELDS 1/2 Inch Front Windshield for Kubota SSV Skid Steers

Kubota SSV65 and SSV75 skid steers built in 2024 and earlier take this SHIELDS front windshield, made to replace glass V1311-34522. It is flat 1/2 inch polycarbonate with the edges and holes milled and the window prepped for a glue-in install, the same way the factory glass goes in. SHIELDS recommends its SHIELDS Caulk for the bond, since RTV silicone only seals out weather and will not hold the window. SUPERCOAT covers both sides, and you can choose clear or tint. Machines from 2025 on use a different milling.

This SHIELDS 1/2 inch polycarbonate front windshield replaces the glass on Kubota SSV skid steers. SHIELDS mills the edges and holes and preps the window for a glue-in install, just like the original glass, and coats both sides with its SUPERCOAT hard coat. Choose clear or tint.

SHIELDS Kubota SSV Front Windshield Features: Skid Steer Glass Replacement Prepped for Glue-In

• 1/2 inch formed polycarbonate, which SHIELDS rates at more than 260 times the strength of glass at half the weight
• SUPERCOAT hard coat on both sides resists abrasion, so you can keep using your wiper
• Edges and holes milled and the window prepped for a glue-in install, like the original glass
• For the glue-in bond SHIELDS recommends its SHIELDS Caulk; RTV silicone only seals out weather and will not hold the window
• Flat like the original glass
• Tint is built into the material, not a film; SHIELDS advises against adding aftermarket tint film because the coating will not hold adhesives

Kubota SSV Windshield Part and Glass Numbers

SHIELDS publishes the material data that applies to this Kubota SSV windshield: the SHIELDS polycarbonate windshield technical data sheet (PDF) covers impact strength, light transmission and UV resistance, the SHIELDS SUPERCOAT hard coat data sheet (PDF) covers abrasion and chemical resistance, and the SHIELDS polycarbonate vs glass comparison sheet (PDF) compares weight, sound, heat and light by thickness.

Which Kubota SSV Skid Steers Does This Windshield Fit?

Fits the Kubota SSV65 and SSV75.

This is SHIELDS' window for 2024 and older SSV machines; SHIELDS notes 2025 and newer machines take a different milling.

The clear window replaces glass V1311-34522 and V1311/1314-96803; the tint window replaces V1311-34522 and V1311/1314-96804.

Send us your machine make, model and serial number, plus the glass number from your current window if you have it, and we will confirm the fit before you order.