SHIELDS 1/2 Inch Front Windshield for Kubota SVL Track Loaders

Kubota SVL compact track loaders take this SHIELDS front windshield in two millings. The -2 milling fits the SVL65, SVL75, SVL90, SVL95, SVL97 and SVL110, and the -3 milling fits the SVL75-3 and SVL97-3. Both replace glass V0621-34520 in flat 1/2 inch polycarbonate with milled edges and holes, prepped for a glue-in install like the original glass, with SHIELDS Caulk recommended for the bond. SUPERCOAT on both faces lets you keep running the wiper, and each version comes clear or tint.

This SHIELDS 1/2 inch polycarbonate front windshield replaces the glass on Kubota SVL compact track loaders. SHIELDS mills the edges and holes, preps the window for a glue-in install like the original glass, and coats both sides with its SUPERCOAT hard coat. It comes in the -2 and -3 millings, in clear or tint.

SHIELDS Kubota SVL Front Windshield Features: a Kubota Skid Steer Door Window in -2 and -3 Millings

• 1/2 inch formed polycarbonate, which SHIELDS rates at more than 260 times the strength of glass at half the weight
• SUPERCOAT hard coat on both sides resists abrasion, so you can keep using your wiper
• Edges and holes milled and the window prepped for a glue-in install, like the original glass
• Two millings: -2 for the SVL65, SVL75, SVL90, SVL95, SVL97 and SVL110, and -3 for the SVL75-3 and SVL97-3
• For the glue-in bond SHIELDS recommends its SHIELDS Caulk; RTV silicone only seals out weather and will not hold the window
• Tint is built into the material, not a film; SHIELDS advises against adding aftermarket tint film because the coating will not hold adhesives

Kubota SVL Windshield Part and Glass Numbers

SHIELDS publishes the material data that applies to this Kubota SVL windshield: the SHIELDS polycarbonate windshield technical data sheet (PDF) covers impact strength, light transmission and UV resistance, the SHIELDS SUPERCOAT hard coat data sheet (PDF) covers abrasion and chemical resistance, and the SHIELDS polycarbonate vs glass comparison sheet (PDF) compares weight, sound, heat and light by thickness.

Which Kubota SVL Track Loaders Does This Windshield Fit?

The -2 milling fits the Kubota SVL65, SVL75, SVL90, SVL95, SVL97 and SVL110; the -3 milling fits the SVL75-3 and SVL97-3.

SHIELDS' store matches the -2 milling to machines from 2022 and older and the -3 milling to 2023 and newer.

Both replace glass V0621-34520.

Send us your machine make, model and serial number, plus the glass number from your current window if you have it, and we will confirm the fit before you order.