SHIELDS 1/2 Inch Front Windshield for the Takeuchi TL6R

The front window on a Takeuchi TL6R is either glass held in a gasket or an OEM polycarbonate panel glued to a door that swings out, and SHIELDS makes a 1/2 inch polycarbonate replacement for each. The glass version replaces glass 658600077 and sits in your original gasket, with milled edges. The OEM poly version has an etched edge and glues onto the frame, with SHIELDS Caulk recommended for the bond. Both are flat with SUPERCOAT on both sides and come clear or tint. Tell us which window you have now.

This SHIELDS 1/2 inch polycarbonate front windshield replaces the front window on the Takeuchi TL6R. The glass replacement uses your original gasket, and the OEM poly replacement, for doors that swing out, glues onto the frame; both are coated on both sides with SHIELDS' SUPERCOAT hard coat, in clear or tint.

SHIELDS Takeuchi TL6R Front Windshield Features: a Polycarbonate Door for Skid Steer Cabs, Glass or Poly Version

• 1/2 inch formed polycarbonate, which SHIELDS rates at more than 260 times the strength of glass at half the weight
• SUPERCOAT hard coat on both sides resists abrasion, so you can keep using your wiper
• Glass version replaces glass 658600077 and fits your original gasket, with milled edges
• OEM poly version replaces the factory polycarbonate window on doors that swing out; it has etched edges and glues onto the frame
• For the glue-in bond SHIELDS recommends its SHIELDS Caulk; RTV silicone only seals out weather and will not hold the window
• Tint is built into the material, not a film; SHIELDS advises against adding aftermarket tint film because the coating will not hold adhesives

Takeuchi TL6R Windshield Part and Glass Numbers

SHIELDS publishes the material data that applies to this Takeuchi TL6R windshield: the SHIELDS polycarbonate windshield technical data sheet (PDF) covers impact strength, light transmission and UV resistance, the SHIELDS SUPERCOAT hard coat data sheet (PDF) covers abrasion and chemical resistance, and the SHIELDS polycarbonate vs glass comparison sheet (PDF) compares weight, sound, heat and light by thickness.

Which Takeuchi TL6R Windshield Version Do I Need?

Fits the Takeuchi TL6R.

Pick the version by what is in your machine now: the original glass with a gasket, or the OEM polycarbonate window glued to a door that swings out.

Send us your machine make, model and serial number, plus the glass number from your current window if you have it, and we will confirm the fit before you order.