EIP Manufacturing Standard Series Skid Steer Brush Cutter

Fence lines, pasture edges and overgrown lots fill with brush and saplings a finish mower cannot handle. The EIP Manufacturing standard series brush cutter clears that growth with a standard flow skid steer, cutting trees up to 4 inches in diameter with 5/8 inch AR400 blades and flywheel under a 1/4 inch grade 50 deck. It comes in 60, 72 and 78 inch models and runs with a case drain, or without one on machines under 25 GPM. EIP builds it for up to 35 GPM.

The EIP Standard Series Brush Cutter clears brush and trees up to 4 inches in diameter on standard flow skid steers, with 5/8 inch AR400 blades and flywheel under a 1/4 inch grade 50 deck. It comes in 60, 72 and 78 inch models cutting 57.5 to 75.5 inches wide.

EIP Manufacturing Standard Series Brush Cutter Features: a Skid Steer Brush Cutter for 4 Inch Trees

• Cuts trees up to 4 inches in diameter
• 5/8 inch AR400 blades and flywheel
• 1/4 inch grade 50 main deck reinforced with rectangular tubes
• Dual pressure reliefs for safe operation in both directions
• Runs with or without a case drain; audible alert tells you when it is safe to approach after shutdown
• Push bar, dual steps on each side and a 2.25 inch minimum cut height

EIP Standard Series BCS60, BCS72 and BCS78 Specifications

Will the EIP Standard Series Fit My Skid Steer?

The brush cutter mounts on a universal skid steer quick attach and runs on standard flow auxiliary hydraulics; EIP builds the standard series for machines up to 35 GPM. It is 22 inches tall.

It runs with a case drain or, on machines under 25 GPM only, without one. Tell us whether your machine has a case drain line when you order.

Send us your machine make and model before you order and we will confirm the flow, the case drain and the size for it.